7 First steps
15
Description
To make a section of the display larger or
smaller, touch the display with two fingers and
move them apart or together.
Dragging
You can move an element by touching it,
holding it and dragging it to the required
position.
Example: Changing the display sequence of the
measurement parameters.
Keypad
Some functions require values (figures, numerical value, unit, characters) to be
entered. The values are entered via a keypad.
Input field is enabled (flashing cursor)
Enter value: tap the required value
on the display (figures, numerical
value, unit, characters).
Repeat steps as required.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
