10 Maintenance
63
Clean the measuring instrument
If the housing of the measuring instrument is dirty, clean it with a damp
cloth.
Use distilled water, or alternatively mild solvents, such as isopropanol,
to clean the flue gas analyzer.
CAUTION
Improper use of isopropanol!
Irritation of the eyes and sensitive mucous membranes! Fumes have a
slight narcotic effect!
- If using isopropanol, please refer to the instruction leaflet for the product.
- When using it, please ensure that there is adequate ventilation.
ATTENTION
Leaking solvents and degreasers!
Damage to the instrument and sensors!
- Do not store solvents and degreasers, such as isopropanol, in the case.
ATTENTION
Strong or harsh alcohol or brake cleaner!
Damage to the instrument!
- Do not use any strong or harsh alcohol or brake cleaner.
Drain condensate trap
The fill level of the condensate trap can be read from the markings. Hold the
instrument horizontally or vertically to check the fill level.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
