TESTO 300 LL - Page 36

8 Using the product
38
5
Entry of account name (optional) and name which appears with the
sent e-mails.

The inbox of the e-mail account is opened.
If the system does not accept the e-mail address and password
combination, but you are certain it is correct, check the following
possible solutions:
• Open e-mail client, e.g. gmail, on a PC and check e-mail reception.
The provider may have sent a security e-mail which has to be
confirmed before the e-mail account on the testo 300 is accepted.
• Enable IMAP account
To do this, call up your e-mail account on the PC. You will find the
setting for the common e-mail providers, e.g. yahoo, under settings
- POP/IMAP. Account-specific information about the enabling of the
IMAP account is supplied by the relevant provider. Find out about
this from the relevant provider or on the Internet.
• Manual set-up of the e-mail account
1.
Call up function: |
E-Mail.
2.
Enter e-mail address.
3.
Select Manual set-up.
4. Select
Personal account type (IMAP)
(recommended).
5. Enter password.
6.
Enter/change server, port and security type.
This information is e-mail account specific and is supplied
by your e-mail account provider. Find out about this from
your account provider or on the Internet.
7.
[Next]
8. Enter/change smtp server, port and security type.
This information is e-mail account specific and is supplied
by your e-mail account provider. Find out about this from
your account provider or on the Internet.
9.
[Next]
10.
Set account options, such as synchronization interval.
11.
[Next]
12. Entry of account name (optional) and name which appears
with the sent e-mails.
13.
[Next]

The inbox of the e-mail account is opened.
w ww. . com
information@itm.com1.800.561.8187