TESTO Saveris T3 Commissioning Instructions

6 Commissioning
17
6.3 Commissioning the Saveris base
6.3.1 Inserting SIM card (optional)
For a Saveris base with integrated GSM module, you must insert the SIM card.
The SIM card for sending SMS messages is not included in the scope
of delivery and must be purchased separately from a mobile phone
provider.
It is recommended that you use a contract card instead of a so-called
prepaid card, as no alarm messages can be sent if you use up your
credit.
1
Switch off the Saveris base (with the Info Base view selected, press
[ESC] briefly twice).
2
Undo the screw connection and remove the base plate from the
Saveris base.
3
Push the SIM card into the card slot as shown.
The SIM card pushes the catch to the side as it is being
inserted. If the card is inserted, a spring pushes the catch back
and the SIM card is thus secured in the card slot.
4
Place the base plate on the Saveris base and screw it down.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English