TESTO Saveris T3 Commissioning Instructions

6 Commissioning
55
8
Place housing cover on the
Saveris router.
9
Screw on housing cover .
10
Insert protective caps .
The procedure for wall mounting a Saveris router is the same as for a
data logger, see section 6.10.4 Wall mounting of testo Saveris
T1/T1D/T2/T2D/Pt/PtD/H4D WiFi data loggers
6.9.5.3 Registering testo Saveris router
You can register a maximum of 30 Saveris routers to the Saveris base.
The Saveris base can communicate directly with a maximum of 15
Saveris routers.
1
On the Saveris base, use the [▼] key to switch to the Info System
menu.
2
Press [Enter] to call up the Login function.

The status bar on the display
indicates that the Saveris base is
ready for Saveris router detection.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English