TESTO Saveris T3 Commissioning Instructions

6 Commissioning
54
3
Take housing cover off router.
4
Unscrew and remove cover cap of cable opening .
5
Loosen clamping screws .
6
Feed cabling through the cable opening and insert into the clamps
.
It is not necessary to note the polarity.
7
Tighten clamping screws.
Leaktightness and strain relief on the probe housing is only guaranteed
when using a PG screw connection.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English