TESTO Saveris T3 Commissioning Instructions

6 Commissioning
65
6.9.8.2 Fitting Saveris cockpit unit in the driver's cab and
connecting it to a power supply
Do not fit the Saveris cockpit unit while driving.
Ensure that the Saveris cockpit unit does not obstruct your line of vision
while driving.
Comply with road traffic regulations.
Always use the adapter supplied (order no. 0554 1038) for connection
to the vehicle electrical system. We recommend connecting to a
permanently supplied socket.
1
Push the mini USB cable into the
connection port .

At below 15°C: warm the windscreen and sucker.

If the windscreen is dirty: clean the windscreen with a suitable cleaning
agent.
2
Secure the mount on the windscreen using the sucker.
3
Insert the mount into the guide until
you hear it click into place.
4
Connect adapter (order no. 0554 1038) to the USB cable and plug into
the socket of the vehicle electrical system.

Green LED lights up when the Saveris cockpit unit is supplied with
power.

Saveris cockpit unit is ready for use.
Before each trip, particularly when temperatures fluctuate, check that
the mount is secure.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English