TESTO Saveris T3 Commissioning Instructions

6 Commissioning
36

The startup wizard is launched.
2
Click on [Next >].
3
Enter the IP address of the Saveris
base. This is located on the Saveris
base in the Info Base window.
4
Click on [Continue].

The Settings for base instrument
of the Saveris base are displayed.
Date and time settings will be automatically adopted from the PC. The
administrator must make sure that the system time is regularly
compared with a reliable time source and adjusted if necessary, so as
to ensure the authenticity of the measurement data.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English