TESTO Saveris T3 Commissioning Instructions

6 Commissioning
49
2
Click on [Next >].

The Commission new data logger
dialogue is displayed.
3
Leave default setting and click on [Next >].
Saveris analog couplers can always only be included in the
configuration as additional elements and cannot be used as
replacements for existing ones.

The Scale dialogue is displayed.
The fields of the Scale, Display from, to, Unit and Decimal places
columns are initialized. These fields can be amended individually.
4
Select Scale (see type plate / transmitter operating manual).
5
Enter Display from and to (see type plate / transmitter operating
manual).
6
Select Unit. If the required unit is not available in the selection list: Add
via [User-defined unit].
7
Select number of Decimal places.
8
Click on [Set up sum channel], if a specific unit needs to be totalized.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English