TESTO Saveris T3 Commissioning Instructions

6 Commissioning
57

The welcome dialogue for the startup
wizard is displayed.
2
Click on [Next >].

The System status dialogue is displayed with the General tab.
3
Switch to the Integrate router tab.
The direct connection type means that the data logger is directly
registered on the Saveris base or a Saveris converter.
4
Click in the Connection type cell of the data logger which needs to be
assigned to a Saveris router.

The cell is shown as a selection list.
5
Use the button to open the selection list and select the Saveris router
which the data logger needs to be assigned to.
5.1
Perform steps 4 to 5 for all other data loggers with measurement data
that need to be transmitted to the Saveris base via a Saveris router.
6
Position the data logger and Saveris router at their mounting locations
to check the radio links.

TESTO Saveris T3 Specifications

General

Brand	TESTO
Model	Saveris T3
Category	Measuring Instruments
Language	English