Texas Instruments TI-73 Explorer - Creating and Naming a New Program; Create New 8 1 1

224
Chapter 12: Programming
7312ENG.DOC CH 12 Programming, English Julie Hewlett Revised: 07/29/98 12:17 PM Printed: 05/19/99 9:02
AM Page 224 of 32
Creating and Naming a New Program
You create a new program by selecting
1:Create New
from the
8
NEW
menu. You then are prompted to name the new
program.
8""
1:Create New
Creates a new program and displays
the
PROGRAM Name=
screen, prompting
you to name the new program.
Create New Create New 8 " " 1 1
After you select
1:Create New
from the 8
NEW
menu, the
TIN73 displays
Name=
to prompt you to name the new program.
A program name can be one to eight characters long. The first
character must be a letter from A to Z. The second through
eighth characters can be any combination of letters and
numbers.
Access letters from the Text editor (- t). If you type a
name with more than eight characters, the calculator accepts
the first eight characters and disregards the rest.
Create a new program and name it
PROGRAM1
.
1. Display the 8
NEW
menu.
8""
2. Select
1:Create New
.
b
³