Texas Instruments TI-89 Titanium User Manual

Operating the Calculator 174
Ê There are three pages of mode listings. Press ƒ, „, or … to quickly display a particular
page.
Ë Indicates you can scroll down to see additional modes.
Ì ! indicates that you can press B or A to display and select from a menu.
Note:
Modes that are not currently valid are dimmed. For example, on Page 2, Split 2 App
is not valid when
Split Screen = FULL. When you scroll through the list, the cursor skips
dimmed settings.
Changing Mode Settings
From the MODE dialog box:
1. Highlight the mode setting you want to change. Use D or C (with ƒ, „, or …) to
scroll through the list.
2. Press B or A to display a menu that lists the valid settings. The current setting is
highlighted.
3. Select the applicable setting. Either:
• Use D or C to highlight the setting and press ¸.
– or –
Ê
Ë
Ì

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches