Texas Instruments TI-89 Titanium User Manual

Tables 451
Note: In this example, you can move the cursor to column 2, but you can enter values in
column 1 only.
Entering a List in the Independent Variable Column
1. Move the cursor to highlight any cell in the independent variable column.
2. Press † to move the cursor to the entry line.
3. Type a series of values, enclosed in braces { } and separated by commas. For
example:
You can also enter a list variable or an expression that evaluates to a list.
Note: If the independent variable column contains existing values, they are shown as
a list (which you can edit).
4. Press ¸ to move the values into the independent variable column. The table is
updated to show the corresponding function values.
Enter values in any
numerical order.
Enter a new value here.
Shows full value of
highlighted cell.
x={1,1.5,1.75,2}

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches