Texas Instruments TI-89 Titanium User Manual

Programming 611
Creating a Table or Graph
To create a table or a graph based on one or more functions or equations, use the
commands listed in this section.
Table Commands
Graphing Commands
Command Description
DispTbl Displays the current contents of the Table screen.
setTable Sets the Graph <–> Table or Independent table
parameters. (To set the other two table parameters, you
can store the applicable values to the tblStart and
@tbl
system variables.)
Table Builds and displays a table based on one or more
expressions or functions.
Command Description
ClrGraph Erases any functions or expressions that were graphed
with the Graph command.
Define Creates a user-defined function.
DispG Displays the current contents of the Graph screen.
FnOff Deselects all (or only specified) Y= functions.
FnOn Selects all (or only specified) Y= functions.

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches