Texecom Premier 24 - Installation Company Details; Installation Engineer; Service Record; Emergency Telephone Numbers

The Programming Menu Premier 24 Installation Manual
64 INS248
Digi Options
H73!:0!3$-$6:TU
VBGWB595
!
@
D
:5
08<
Yes
VBGWB595!@D:508<
;$<$:!B595
B595!@D:508<
!M!M!M!M!M!M
Press NO to edit
the Digi option
No
4 ghi
B595!5<!78(I-$E
\M!M!M!M!M!M
No
O-5
8
E
!
B5
(
--5
8
9
!M!M!M\M!M!M!
VBGWB595
!
@
D
:5
08<
B595!@D:508<
Yes
Use keys 1 - 8 to select
an option or use the
SCROLL key to search
Yes
O-5
8
E
!
B5
(
--5
8
9
!M!M!M\O!M!M!
Press NO to
select/deselect
the option
There are 5 options that control how the plug-on
igimodem works.
Select options by pressing keys 1 to 8 (a letter on the
display means the option is selected, a star on the display
means the option is not selected).
E – Digi is Enabled (Default = OFF)
The plug-on igimodem will report all system events to the
Alarm Receiving Centre.
P – Pulse Dialling (Default = OFF)
The plug-on igimodem will always dial telephone
numbers using pulse dialling.
3 – Pulse After 3 (Default = OFF)
The plug-on igimodem will always dial telephone
numbers using tone dialling. However, if the Digimodem
fails to dial the number three times in a row, it will revert to
pulse dialling for the remaining attempts.
B – Blind Dialling (Default = OFF)
The plug-on igimodem will not look for a dial tone before
dialling a telephone number.
R – Reserved (Default = OFF)
This option is not used.
A – Dial All Numbers (Default = OFF)
The igimodem will not shut down until an
acknowledgement has been received from all
programmed telephone numbers.