Texecom Premier 24 - Do Bell Test; Do Walk Test

Premier 24 Installation Manual Programming the Control Panel
INS248 79
Do Bell Test
Yes
78958$$)!V:5-<
B0!O$--!"$<:
K
#<
L
!
H73
!
:
0!
:
$<
:
O
$
--
!
5
<!!!!!
\@AA
Menu
3 def
K
#<
L
!
H73
!
:
0!
:
$<
:
B595
!
\
!!MMMMMMMM
Press YES to test ALL
channels or use keys 0 - 8
to select individual channels
e.g. 3 = Channel 3
K#<L!H73!:0!:$<:
B595!\!!MMMMMMMM
3 def
K
#<
L
!
H73
!
:
0!
:
$<
:
B595
!
\
!!MMMMMMMM
Press YES again to clear ALL
channels or use keys 0 - 8
to clear individual channels
e.g. 3 = Channel 3
Use the SCROLL key to
select the required test
Yes
2
abc
H73!:0!3$-$6:TU
78958$$)!V:5-<
78958$$)!V:5-<
R5$F!74$8:!G09
This option allows the Bell, Speaker and various control
panel outputs to be tested.
The following outputs can be individually tested:
Test Bell The Bell output
Test Strobe The Strobe output
Test Speaker The Speaker output
LCD Display The LCD keypad display
User Outputs Any outputs that have the ‘User Test’
attribute (see page 59 for details).
Test Panel The 6 panel outputs
Test Comm The 8 plug on digi outputs
Do Walk Test
Yes
78958$$)!V:5-<
B0!F(-?!:$<:[
Yes
1
Menu
Chime
Press CHIME to select:
Chime Once then lockout zone
No Chime at all
Chime on every activation
or
Press AREA. to toggle the
display between the zones
that still need testing and
the Zone text for those zones
A
rea
X08$!%+!.6:54$
K-$(<$!"$<:!%*!!!!
H73!:0!3$-$6:TU
78958$$)!V:5-<
78958$$)!V:5-<
R5$F!74$8:!G09
>(-?!"$<:
M!N08$!"$<:$E!M
X08$!%+!.6:54$
K-$(<$!"$<:!%*!!!!
Any of the zones on the system can be walk tested to
ensure that they operate correctly. A walk test can only be
performed when the system is disarmed.
!
Once a zone has been activated it will not generate
a chime tone again. If however the
2
key is
pressed, a zone will chime every time it is activated.
Pressing the
6
key will display the zone text
associated with the zones.