Texecom Premier 24 - Radio;Sms Options; Com Port Setup

Premier 24 Installation Manual Programming the Control Panel
INS248 67
Radio/SMS Options
Use keys 0 - 9 to enter
the telephone number
Omit = *, Chime = #
Part = 3 second Pause
Area = 10 Second Pause
H73!:0!3$-$6:TU
VBGWB595
!
@
D
:5
08<
Yes
VBGWB595!@D:508<
;$<$:!B595
3'3!N0*!
Press NO to edit
the Number
7 pqrs
No
VBGWB595
!
@
D
:5
08<
;
(
E5
0
W3'3
!
@
D
:5
08
Yes
Yes
3'3
!
N
0
*\
K.B!N0+!
Use the SCROLL key
to select PAD Number 1 or 2
or SMS Number 1 or 2
3'3
!
N
0
*\%cc`_baa
aa]
????
Pad ARC 1 Pri No
This is the first number that is used by the Radio-Pad for
reporting events to ARC set 1.
Pad ARC 1 Sec No
This is the second number that is used by the Radio-Pad
for reporting events to ARC set 1.
Pad ARC 1 Prefix
This number will prefix the account number for ARC 1.
Pad ARC 2 Pri No
This is the first number that is used by the Radio-Pad for
reporting events to ARC set 2.
Pad ARC 2 Sec No
This is the second number that is used by the Radio-Pad
for reporting events to ARC set 2.
Pad ARC 2 Prefix
This number will prefix the account number for ARC 2.
SMS Centre Pri.
This is the first SMS centre telephone number that is used
by for sending SMS to mobile phones. (Default = 07860
980480).
SMS Centre Sec.
This is the second SMS centre telephone number that is
used by for sending SMS to mobile phones.
Com Port Setup
H73!:0!3$-$6:TU
VBGWB595!@D:508<
VBGWB595!@D:508<
;$<$:!B595
Yes
8 tuv
@8I0()E!B59560/
,0/]%%!'0E#-$
VBGWB595!@D:508<
,0/!K0):!3$:#D
,
0/!
K
0)
:
!
+
N
0!
'
0
E
#
-
$!
25::
$
E
No
,
0/!
K
0)
:
!
+
N
0!
'
0
E
#
-
$!
25::
$
^
,0/!K0):!+
Y3'
!
'
0
E
#
-
$!!!!!
^
7 pqrs
Yes
Press NO to edit
the Com Port
Use the SCROLL
key to select the
required Com Port
Yes
Use keys 0 - 8 to select
an device or use the
SCROLL key to search
The control panel must be programmed with the type of
device that is connected to each of its com ports.
Onboard Digicom
This option determines what type of device is connected to
the plug-on digmodem connector (Default = Com300).
Com1
This option determines what type of device is connected to
the Com1 connector (Default = No Module Fitted).
Com2
This option determines what type of device is connected to
the Com2 connector (Default = No Module Fitted).
Available Device Types
No Module Fitted
Com300
Com2400
ComISDN
Paknet Radio-Pad
GSM Module