volume is available from the list. Please refer to the screenshot below.
If creating an iSCSI target volume under “Instant Allocation”, physical memory is assign to the target,
being limited by the available memory. For the iSCSI target volume created under “thin-provisioni n g ”,
virtual memory is assigned to the volume, which can go up to 16384GB (16TB).
LUN ACL•
After iSCSI target has been created, you are one step away from using the iSCSI volume. Under “LUN
ACL”, you need to add “Initiator iqn” and setup ACL access privileges to determine the accessibility.
Please refer the screen shot below for where “Initiator iqn” can be found.
From the LUN ACL setting screen click “Add”:
To Next Page
Loading...
