LDAP Support
The LDAP is the other way to authenticate login users who has joined LDAP server,
fill in the LDAP server information and get LDAP authentication started. Please
make sure that the LDAP server has a Samba sam and a POSIX ObjectClass
account.
A description of each item follows:
Enable or Disable LDAP service.
Input LDAP server IP address.
Input base domain information ex. dc=tuned, dc=com, dc=tw
Click Apply to save your changes.
Click this checkbox to ensure LDAP server has a Samba sam and
a POSIX account or it may not work properly for LDAP client
authentication.
Network Service
Use the Network Service menu to make network service support settings.
Samba / CIFS
There are options allow Admin to Enable/Disable to operate Thecus IP storage
associated with Samba / CIFS protocol. With the option changed, it will need to
reboot system to activate.