VPN Server
This storage device provides VPN server service and this allows remote access to
this device via a secure connection. Settings can be found in the “Network Service”
tab as seen below
To setup your VPN server you must first choose the NIC interface from the drop
down menu and complete the rest of the necessary information.
Below is a description of each item:
Select the NIC interface to use for VPN server
Enable L2TP/IPSec VPN
Server
Check to enable L2TP/IPSec VPN server service
Input the IP range for client IP.
Input the IP for the VPN server for VPN client connection
Input domain name with DDNS registry.
Internet Key Exchange for authentication while connection is
made.
Input the key for connection authentication in between VPN
client and server.
Click “Apply” to confirm the changes.
For the VPN client access control, simply click on “Client Management” tab. It will
list all the users on this system and default “Allowed” for VPN connection. Un-tick
the check box and confirm with the “Apply” button if users are prohibited from
connecting with this VPN server.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
