System Management
The System Management menu gives you a wealth of settings that you can use
to configure your Thecus IP storage system administration and functions. You can
set up system time, system notifications, and even upgrade firmware from this
menu.
Time: Setting system time
From the time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on Thecus IP storage with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Select Enable to synchronize with the NTP server.
Select Disable to close the NTP server synchronization.
Select YES to allow Thecus IP storage to synchronize with an NTP
server of your choice. Press Apply to change.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
