States change to “Finish” after task complete.
From the RAID volume folder ‘andy_local’, it has backup iSCSI volume file stored.
This backup iSCSI volume file is needed while it required import to storage. Next
topic will describe about this.
6. iSCSI Import: click on “iSCSI Import” and screen appear as below.
It can be imported from two different storage pools, folder to iSCSI or external
device to iSCSI. It is depend on where iSCSI volume has backup to.
Let’s take example to import “RAID folder to iSCSI” which is the iSCSI volume
we have backup earlier to RAID volume folder andy_local than import to volume
RAID.
To Next Page
Loading...
