The Browseable setting is the same method used for setting a system share folder.
It designates whether or not this folder will be visible through web disk. You may
refer to the figure below for reference when Yes and No are selected.
The Public setting will be set the same way as the setting for the system share
folder associated with the ACL permission is. If Public is set to Yes, all users will be
able to access it, and ACL button will be grayed out. If Public is set to No, the ACL
button will be available in the Stack Target List window.
Click Apply to save your changes.
B. Activate a Stack Target
After your settings have been applied, the system will bring you back to the Stack
Target List window as shown below. There is one stack target device that has
been attached into this stack master.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
