THORLABS DC2200 - Page 56

© 2020 Thorlabs GmbH54
DC2200
Error
Description
134
Nonvolatile memory missing
135
Async transfer is already running
140
FPGA configuration error
150
Fan controller not responding
151
Fan failure
170
RAM device failure
171
RAM address bus failure
172
RAM data bus failure
180
Touch controller INT signal failure
181
Touch controller INT signal timeout
182
Touch controller command error
183
Touch controller unrecognized command
184
Touch controller unrecognized header
185
Touch controller command timeout
186
Touch panel is not calibrated
187
Touch controller calibration canceled
188
Touch calibration already running
189
Touch calibration is not running
190
Touch calibration point is out of bounds
200
Value is not editable
201
Operation is not applicable
210
Numeric value error
211
Value minimum reached
212
Value maximum reached
213
Step size lower limit reached
214
Step size upper limit reached
220
Selection limit reached
230
Value is out of range
231
Not editable while output is ON