EasyManuals Logo

THORLABS DCU22 Series User Manual

THORLABS DCU22 Series
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #229 background imageLoading...
Page #229 background image
224 DCx camera
© 2010 Thorlabs
IS_SET_AUTO_REFERENCE
Sets the setpoint value for auto gain / auto shutter.
pval1
the setpoint value (average image brightness).
Independent of pixel bit depth the setpoint range is:
0 = black
128 = 50% grey (default)
255 = white
IS_GET_AUTO_REFERENCE
Returns the setpoint value for auto gain / auto shutter.
pval1
returns the current value
IS_SET_AUTO_GAIN_MAX
Sets the upper limit for auto gain.
pval1
valid value for gain (0...100)
IS_GET_AUTO_GAIN_MAX
Returns the upper limit for auto gain.
pval1
returns the current value
IS_SET_AUTO_SHUTTER_MAX
Sets the upper limit for auto exposure.
pval1
valid exposure value (0 sets the value continuously to max. exposure)
IS_GET_AUTO_SHUTTER_MAX
Returns the upper limit for auto exposure.
pval1
returns the current value
IS_SET_AUTO_SPEED
Sets the speed value for auto gain / auto exposure.
pval1
defines the control speed (0...100)
IS_GET_AUTO_SPEED
Returns the speed value for auto gain / auto
exposure.
pval1
returns the current value
IS_SET_AUTO_HYSTERESIS
Sets the hysteresis for auto gain / auto exposure.
pval1
defines the hysteresis value (default: 2)
IS_GET_AUTO_HYSTERESIS
Returns the hysteresis for auto gain / auto exposure.
pval1
returns the current value
IS_GET_AUTO_HYSTERESIS_RANGE
Returns range for the hysteresis value.
pval1
returns the minimum value
pval2
returns the maximum value
IS_SET_AUTO_SKIPFRAMES
Sets the number of frames to be skipped for auto gain
/ auto exposure.
pval1
defines the number of frames to be skipped (default: 4)
IS_GET_AUTO_SKIPFRAMES
Returns the number of frames to be skipped for auto
gain / auto exposure.
pval1
returns the current value
IS_GET_AUTO_SKIPFRAMES_RANGE
Returns range for the number of frames to be
skipped.
pval1
returns the minimum value
pval2
returns the maximum value
IS_SET_AUTO_BRIGHTNESS_ONCE
Enables / disables automatic disabling of auto gain /
auto exposure **
)
.
pval1
= 1 enables, 0 disables control
IS_GET_AUTO_BRIGHTNESS_ONCE
Returns the automatic disable status of auto gain /
auto exposure **
)
.
pval1
returns the current value

Table of Contents

Other manuals for THORLABS DCU22 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU22 Series and is the answer not in the manual?

THORLABS DCU22 Series Specifications

General IconGeneral
BrandTHORLABS
ModelDCU22 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals