THORLABS DCU22 Series User Manual

229SDK (Software development Kit)
© 2010 Thorlabs
7.3.72
is_SetBadPixelCorrectionTable
USB 2.0
USB 2.0
Syntax
INT is_SetBadPixelCorrectionTable (HIDS hCam, INT nMode, WORD* pList)
Description
is_SetBadPixelCorrectionTable() can be used to set the table containing the hot pixel positions
which will be used by the user-defined hot pixel correction function. You can enable hot pixel
correction by calling is_SetBadPixelCorrection() . Each value in the table consists of a 2-
byte WORD data type. The first value indicates the number of pixel coordinates in the table, the
coordinates are listed subsequently (first X, then Y).
A table with 3 hot pixels must be structured as follows:
3
X1
Y1
X2
Y2
X3
Y3
Input Parameters
hCam
Camera handle
nMode
IS_SET_BADPIXEL_LIST
Sets a new user-defined list.
The pList parameter points to a list which has the format
described above.
IS_GET_LIST_SIZE
Returns the number of pixel coordinates included in the
user-defined list.
IS_GET_BADPIXEL_LIST
Copies the user-defined list to the pList parameter. Make
sure to allocate the memory accordingly.
pList
Pointer to the starting address of the hot pixel table
Return Values
IS_SUCCESS
Function executed successfully
IS_NO_SUCCESS
General error message
Number of coordinates in the list
when used together with
IS_GET_LIST_SIZE
Related Functions
is_LoadBadPixelCorrectionTable()
is_SaveBadPixelCorrectionTable()
is_SetBadPixelCorrection()
228
199
209
228

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English