360 DCx camera
© 2010 Thorlabs
8.2
Trouble Shooting
FAQ
Can I use more than one camera simultaneously?
Yes, in order to use the camera viewer with two or more cameras, you need to assign an ID
number to them. Open the camera manager, after you connected your cameras, chose the
camera of choice and use the ID option to assign it. Now you can select the individual cameras, in
the order you like, with the UC480 viewer program. This method can also be used to connect to
several cameras via LabView.
How can I enable the long term exposure of 10min for the DCU camera series?
Choose the external trigger mode in the camera viewer program, or under uc480/Trigger mode:
To Next Page
Loading...
Need help?
General
