EasyManuals Logo

THORLABS DCU22 Series User Manual

THORLABS DCU22 Series
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
67Camera viewer (uc480Viewer)
© 2010 Thorlabs
6.4.11
Miscellaneous
This tab provides parameters for setting the hotpixel correction and test image function for your DCx
camera.
Figure 29: Properties - Miscellaneous
Hotpixel
Hot pixel are sensor pixels whose brightness value deviates significantly from the brightness value of
the surrounding pixels in the case of long exposure times or a high gain setting. Basically every
sensor has a small number of hot pixels. CCD sensors have less hot pixels than CMOS sensors,
which is due to the different sensor systems. The hot pixels are detected during DCx camera testing
and written to a coordinate list in the camera. If hotpixel correction is enabled, the correction function
eliminates these pixels before debayering .
Mark hotpixel
If you select this check box, the hot pixel positions stored in the camera are graphically
represented in the image.
Hotpixel correction
Select this check box if you want to enable a software-based hotpixel correction.
Test image
The camera transmits a selectable test image that you can use for testing the data transmission.
You can choose from different types of test images, depending on the camera type.
Selection
The test images are created by the sensor.
377

Table of Contents

Other manuals for THORLABS DCU22 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCU22 Series and is the answer not in the manual?

THORLABS DCU22 Series Specifications

General IconGeneral
BrandTHORLABS
ModelDCU22 Series
CategorySecurity Camera
LanguageEnglish

Related product manuals