224 DCx camera
© 2010 Thorlabs
Sets the setpoint value for auto gain / auto shutter.
the setpoint value (average image brightness).
Independent of pixel bit depth the setpoint range is:
0 = black
128 = 50% grey (default)
255 = white
Returns the setpoint value for auto gain / auto shutter.
returns the current value
Sets the upper limit for auto gain.
valid value for gain (0...100)
Returns the upper limit for auto gain.
returns the current value
Sets the upper limit for auto exposure.
valid exposure value (0 sets the value continuously to max. exposure)
Returns the upper limit for auto exposure.
returns the current value
Sets the speed value for auto gain / auto exposure.
defines the control speed (0...100)
Returns the speed value for auto gain / auto
exposure.
returns the current value
Sets the hysteresis for auto gain / auto exposure.
defines the hysteresis value (default: 2)
Returns the hysteresis for auto gain / auto exposure.
returns the current value
IS_GET_AUTO_HYSTERESIS_RANGE
Returns range for the hysteresis value.
returns the minimum value
returns the maximum value
Sets the number of frames to be skipped for auto gain
/ auto exposure.
defines the number of frames to be skipped (default: 4)
Returns the number of frames to be skipped for auto
gain / auto exposure.
returns the current value
IS_GET_AUTO_SKIPFRAMES_RANGE
Returns range for the number of frames to be
skipped.
returns the minimum value
returns the maximum value
IS_SET_AUTO_BRIGHTNESS_ONCE
Enables / disables automatic disabling of auto gain /
auto exposure **
)
.
= 1 enables, 0 disables control
IS_GET_AUTO_BRIGHTNESS_ONCE
Returns the automatic disable status of auto gain /
auto exposure **
)
.
returns the current value
To Next Page
Loading...
Need help?
General
