225SDK (Software development Kit)
© 2010 Thorlabs
Adjust auto white balance
Sets the offset value for the red and blue channels.
defines the red level offset (-50...50)
defines the blue level offset (-50...50)
Returns the offset value for the red and blue channels.
returns the red level offset (-50...50)
returns the blue level offset (-50...50)
IS_SET_AUTO_WB_GAIN_RANGE
Sets the gain limits for the auto white balance function.
IS_GET_AUTO_WB_GAIN_RANGE
Returns the gain limits for the auto white balance function.
returns the minimum value
returns the maximum value
Sets the speed value for the auto white balance.
defines the control speed (0...100)
Returns the speed value for the auto white balance.
returns the current value
IS_SET_AUTO_WB_HYSTERESIS
Sets the hysteresis for auto white balance.
defines the hysteresis value (default: 2)
IS_GET_AUTO_WB_HYSTERESIS
Returns the hysteresis for auto white balance.
returns the current value
IS_GET_AUTO_WB_HYSTERESIS_RANGE
Returns range for the hysteresis value.
returns the minimum value
returns the maximum value
IS_SET_AUTO_WB_SKIPFRAMES
Sets the number of frames to be skipped for auto white
balance.
defines the number of frames to be skipped (default: 4)
IS_GET_AUTO_WB_SKIPFRAMES
Returns the number of frames to be skipped for auto white
balance.
returns the current value
IS_GET_AUTO_WB_SKIPFRAMES_RANGE
Returns range for the number of frames to be skipped.
returns the minimum value
returns the maximum value
Enables / disables automatic disabling of auto white balance
**
)
.
= 1 enables, 0 disables control
Returns the automatic disable status of auto white balance
**
)
.
returns the current value
Pre-defined values for auto gain/auto exposure
For parameters pval1 and pval, NULL must be passed.
To Next Page
Loading...
Need help?
General
