TC300 Heater Temperature Controller Chapter 8: Command Line Operation
Rev B, January 5, 2022 Page 25
No.
Command Syntax Description
7
Get CH1 Actual Temperature TACT1?
Get the CH1 actual temperature; returned
value is the actual temperature in °C.
8
Get CH2 Target Temperature TSET2?
Get the CH2 target temperature; returned
value is the actual temperature in °C.
9
Set CH2 Target Temperature TSET2=n
Set the CH2 target temperature to n/10 °C,
the range is defined by TMIN2 and TMAX2,
the settin
resolution of n is 1.
10
Get CH2 Actual Temperature TACT2?
Get the CH2 actual temperature; returned
value is the actual temperature in °C.
11
Get CH1 Max Temperature TMAX1?
Get the CH1 Target Temperature Max value
(Range: TMIN1 to 400°C, with a resolution
of 1°C
.
12
Set CH1 Max Temperature TMAX1=n
Set the CH1 Target Temperature Max
value, n equals value TMIN1 to 400°C, with
a resolution of 1°C
.
13
Get CH2 Max Temperature TMAX2?
Get the CH2 Target Temperature Max value
(Range: TMIN2 to 400°C, with a resolution
of 1°C
.
14
Set CH2 Max Temperature TMAX2=n
Set the CH2 Target Temperature Max value
(Range: TMIN2 to 400°C, with a resolution
of 1°C
.
15
Get CH1 Min Temperature TMIN1?
Get the CH1 Target Temperature Min value
(Range: -200 to TMAX1°C, with a resolution
of 1°C
.
16
Set CH1 Min Temperature TMIN1=n
Set the CH1 Target Temperature Min value,
(Range: -200 to TMAX1°C, with a resolution
of 1°C
.
17
Get CH2 Min Temperature TMIN2?
Get the CH2 Target Temperature Min value
(Range: -200 to TMAX2°C, with a resolution
of 1°C
.
18
Set CH2 Min Temperature TMIN2=n
Set the CH2 Target Temperature Min value
(Range: -200 to TMAX°C, with a resolution
of 1°C
.
19
Get CH1 Output Voltage VOLT1?
Get the CH1 Output Voltage value, with a
range of 0.1 to 24.0 V and a resolution of
0.1V.
20
Get CH2 Output Voltage VOLT2?
Get the CH2 Output Voltage value, with a
range of 0.1 to 24.0 V and a resolution of
0.1V.
21
Get CH1 Output Current CURR1?
Get the CH1 Actual Output Current Value,
the range is -2000 to +2000 mA, with a
resolution of 1mA.
22
Get CH2 Output Current CURR2?
Get the CH2 Actual Output Current Value,
the range is -2000 to +2000 mA, with a
resolution of 1mA.
23
Get CH1 Max Current CMAX1?
Get the CH1 Output Current Max value
(range: 0.010 to 2.000 A, resolution of 0.001
.
24
Set CH1 Max Current CMAX1=n
Set the CH1 Output Current Max value, n
ranges from 10 to 2000 mA, resolution of 1
mA.
25
Get CH2 Max Current CMAX2?
Get the CH2 Output Current Max value
(range: 0.010 to 2.000 A, resolution of
0.001A
.