TC300 Heater Temperature Controller Chapter 2: Safety
Page 2 CTN017856-D02
Chapter 2 Safety
All statements regarding safety of operation and technical data in this instruction manual will only apply when the
unit is operated correctly.
SHOCK WARNING
HIGH VOLTAGE INSIDE
To avoid electrical shock, the power cord protective grounding conductor must be connected to
ground. Do not operate without cover installed. Refer servicing to qualified personnel.
ATTENTION
Do not obstruct the air ventilation slots in the housing.
WARNING
For all applications, use an IEC320 compatible power cord fitted with a plug appropriate for your
particular power socket. Make sure that the line voltage rating marked on the rear panel agrees with
your local power supply and that the appropriate fuses are installed. Changing the main fuse can be
done by the user. Apart from this fuse, there are no user-serviceable parts in this product.
ATTENTION
This unit must not be operated in explosive environments.
!
! !
!
To Next Page
Loading...
Need help?
General
