© 2007-2012 Thorlabs GmbH
49Operating Instruction
NOTE
On occurrence of serious Wavefront Sensor errors the continuous measurement will
stop automatically and you will be asked to change settings and to re-start the
continuous measurement again.
4. Calibration
The following pull down menu occurs:
There are two different ways to perform a User Calibration of the Wavefront Sensor.
See chapter User Calibration for a detailed description.
5. Display
See the following chapters for a detailed description of the interchangeable
graphical displays. Alternatively click on the tabs below the graphics to see the
desired one.
6. Help
The following pull down menu occurs:
Contents
This opens the Wavefront Sensor help file. It contains the same information as the
manual but enables the advantage to search for key words.
Visit the Thorlabs Website
You were directed to the Thorlabs website at www.thorlabs.com that contains
information about new software releases or related products.
View License Agreement
The Thorlabs End-User License Agreement you agreed with is displayed.
About
Shows you the actual software release versions, the Instrument Name and Serial
Number of the used device.
9
5
To Next Page
Loading...
Need help?
General