INTRODUCTION
1-5 110819 Timbery M100 INTRODUCTION
DANGER! Always be sure the blade is disengaged and all persons are out of the
path of the blade before starting the engine or motor. Failure to do so may
result in serious injury or death.
Keep hands away
DANGER! Always disengage the blade and shut off the sawmill motor/engine
before changing the blade. Failure to do so may result in serious injury
or death.
DANGER! Always keep hands away from moving bandsaw blade. Failure to do
so may result in serious injury or death.
DANGER! Always be aware of and take proper protective measures against
rotating shafts, pulleys, fans, etc. Always stay a safe distance from rotating
members and make sure that loose clothing or long hair does not engage
rotating members. Failure to do so may result in serious injury or death.
WARNING! Do not spin the blade wheels by hand. Failure to do so may result in
serious injury or death.
WARNING! Always keep clear of exiting sawdust. Keep hands, feet, and any
other objects away from the sawdust chute when operating the sawmill. Failure
to do so may result in serious injury or death.
WARNING! Never clean the blade or the blade wheels with a brush or a scraper
during sawmill operation.
WARNING! Before installation of the blade, inspect it for damage and cracks.
Use only properly sharpened blades. Always handle the blade with extreme
caution. Use suitable carrier equipment for transporting the blades.
Cautions for gas engine operation
DANGER! The exhaust gases of your engine are poison gases. Operate your
engine/machine in well ventilated areas only. Failure to do so may result in
serious injury or death.
DANGER! Leaking fuel or oil can contact hot surfaces and ignite into flames.
Never operate an engine with a fuel or oil leak. Failure to do so may result in
serious injury or death.
To Next Page
Loading...