1. Press 8 (stop).
2. Press
❋❋
and 9 (change) after
wards.
3. Enter the new telephone number by
the remote control beeper or a tone
dialling telephone. A special function
is available for the dialling procedu
re. These functions can be accessed
by the
❋❋
button.
Press:
❋❋
button and 1 afterwards for:
❋❋
button and 2 afterwards for:
❋❋
button and 3 afterwards for:
❋❋
button and 4 afterwards for:
For pager numbers press
❋❋
and 5
afterwards.
You can select the desired paging
service (see message transfer) by
pressing a corresponding button.
You can also enter a numeric infor
mation if this option is supported by
the paging service. Please press the
following buttons for special charac
ters: # .
press
❋❋
twice.
4. Press
❋❋
and 7 (change) to erase
the telephone number.
5. Press
❋❋
and 8 (stop) to program
the telephone number.
The running function stops.
You are asked to enter a new telephone
number.
You will get a confirmation after each num-
ber.
Three seconds pause.
Wait for dialling tone
Flash
Earth.
= hatch
= star
The telephone number is erased.
The new telephone number is played back
for verification purposes.
36
Remote control: button functions
Remote ON/OFF of the time control:
Remote ON/OFF of the message transfer (only tiptel 331):
1. Press 8 (stop).
2. Press
❋❋
and 1 (room) afterwards.
The running function stops.
The selected status ON or OFF is indicated
by synthesised voice.
1. Press 8 (stop).
2. Press
❋❋
and 6 (forward) after
wards.
The running function stops.
The selected status ON or OFF is indicated
by synthesised voice.
To Next Page
