Page 1-2 Document Ref 941113-001 Rev 2
Introduction Quantium 310 Maintenance Manual
1 INTRODUCTION
1.1 How To Use This Manual
It is recommended that all relevant persons familiarise themselves with the contents of this
manual prior to carrying out any operations or procedures.
This manual is divided into sections which are described as follows: -
Section 1 - Introduction
This section contains information on how to use the manual, the scope of equipment covered,
recommendations on qualified technicians and contact information. It also includes relevant
health and safety information required for the safe practice of common maintenance
procedures.
Section 2 - Maintenance Procedures - General
This section describes the safety procedures to be followed during planned servicing of
dispensers or emergency repair work. It also contains a description of the dispenser sides
and how to access to the dispenser hydraulic and electronic areas.
Section 3 - Maintenance Procedures - Hose Mechanics
This section covers hose and nozzle replacement.
Section 4 - Maintenance Procedures - Hydraulics
In this section, the most common hydraulic maintenance procedures are explained, from a
simple filter replacement through to changing the motors and meters.
Section 5 - Maintenance Procedures - Electronics
The basic electronic maintenance is covered in section 6 including changing fuses, batteries
and pulsers.
Section 6 - Maintenance Procedures - Vapour Recovery
The maintenance procedures relating to the vapour recovery system is explained in this
section which covers the replacement of the VR pump, motor and V-belt.
Section 7 - Drawings
All necessary drawings required for reference during maintenance procedures are listed
and contained in this section.
1.2 Product Scope
The equipment and models covered by the contents of this manual are: -
The Quantium 310 range of fuel dispensers, with the exception of the LPG version. For
information on Quantium LPG dispensers refer to the relevant LPG manual as provided by
Tokheim.
All dispensers in the Quantium 310 range use the same standard sub-assemblies and offer
a wide range of configurations and includes provision for options such as integrated payment
terminal, vapour recovery etc.
To Next Page
Loading...