Document Ref 941113-001 Rev 2 Page 3-3
Quantium 310 Maintenance Manual Maintenance Procedures - Hose
3.2 Changing a Hose
Before starting the maintenance procedure, please refer to section 2.
Identify the relevant hose to be replaced.
Tools required
•Replacement hose (refer to the Parts Manual for exact part identification)
•36mm spanner
•4mm allen key
•Ladder or similar
Description of Parts
Identify the dispenser mast connection i.e. rigid mast or spring mast
Whilst working at height,
ensure all relevant safety
procedures are
observed.
RIGID MAST
HOSE CONNECTION
SPRING MAST
HOSE CLAMP
HOSE CONNECTION
To Next Page
Loading...