i-1
䕔
i Important Safety Information
ڦ
Do not install this instrument in a location where explosives or inflammable
substances are used or stored. Otherwise, fire or explosion may occur.
ڦ
Do not remove the cover of the instrument. Otherwise you may get an electric
shock.
ڦ
Do not disassemble or modify the instrument. Otherwise you may get an electric
shock.
ڦ
Disconnect the power cord from the instrument before servicing the instrument.
Otherwise, you may get an electric shock.
ڦ
Do not place water or chemicals on the instrument. Any water or chemicals
entering the instrument may cause an electric shock or failure.
ڦ
Only use the specified terminal for connection of the instrument. Using another
type of terminal may result in failure of the instrument.
ڦ
This instrument is a diagnostic/capturing device specifically designed for
ophthalmology. Never use the instrument for other purposes.
ڦ
A metal blade is attached to the printer cover. Touching this blade may result in
injuries, so be sure to pay utmost attention when handling the printer cover.
ڦ
The terminal for connecting the instrument to external devices is not isolated
from the internal circuit. Inappropriate wiring may damage the internal circuit.
Contact us or our local distributor before using the instrument while connected to
another device.
To Next Page
Loading...
Need help?
General