䕔
ii-1
ii How to read this manual
Outline
This manual is structured as follows.
1. PRIOR TO USE
Describes safety precautions and important information to be
understood before installing and using the instrument.
2. NAMES AND FUNCTIONS
Describes names and functions of each section of the instrument.
3. OPERATION PROCEDURES
Describes information required for installing and using the instrument.
4. INSPECTION AND MAINTENANCE
Describes procedures for replacing consumable parts, etc. that the
user of the instrument should normally conduct.
5. TROUBLESHOOTING
Describes how to solve problems.
6. CONSUMABLES AND OPTIONAL EQUIPMENT
Describes consumable parts and optional equipment.
7. Specifications
Describes the specifications of the instrument.
Symbols Used In This Manual
Sentences accompanied with the symbols below indicate the
following:
ڦ
This is a precaution that, if unheeded, will result in a hazardous
situation where there is an imminent danger of serious injury or
death.
ڦ
This is a precaution that, if unheeded, could result in a
hazardous situation where there is a possibility of serious
injury or death.
ڦ
This is a precaution that, if unheeded, may result in a situation
where there is a possibility of minor or moderate injury or
damage to property.
ڦ
This is additional information which may contain special
precautions on company policies related, either directly or
indirectly, to the safety of personnel or to the protection of
property.
To Next Page
Loading...
Need help?
General