䕔
3-24
3.4.2 L-count method
The L-count method is an analysis method to calculate values such as CD (cell density)
according to the area and cell center entered by the physician
a) Switching to L-count method
1) Touch the “Method” button (1) on the analysis screen to open the
Method screen (Fig. 2).
(Fig. 1)
(Fig. 2)
2) Touch the “L-count” button (2) and then the “OK” button to open the
Point Edit (L-count) screen (Fig. 3).
b) Editing range and point
ڦ
The L-count assist function is designed to help users operate points. Be sure
that the user themselves check points selected by the L-count assist
function before adding or deleting them.
ڦ
Place a point according to the procedures below. Incorrect calculation
results may be shown if points are not selected correctly.
(Fig. 3)
(2)
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
To Next Page
Loading...
Need help?
General