䕔
4-2
4.2 Operation life
This instrument is designed to have an operation life of 8 years when operated under the
appropriate environment and it is adequately inspected and serviced.
4.3 Inspection
ڦ
When there is a problem, measurement may not be performed correctly.
Contact TOMEY or our local distributor immediately for repair.
ڦ
When measuring the imitation eyes, check that there is no dust or stain on
them.
To make sure that the internal functions operate correctly and performance
is maintained, use the imitation eyes to check the accuracy before using the
instrument.
Inspect method Use the chin rest pins to fix the imitation eyes to the chin rest.
Perform measurement in the same manner as measuring a patient's eyes.
Check that the measured values are within the range specified on the
imitation eyes.
To Next Page
Loading...
Need help?
General