Tomey ViewLight EM-4000 User Manual

3-23䢢 䕔 
c) Selecting cells
Cells used for analysis can be selected from endothelium tissues extracted
by automatic analysis.
Edit marks appear on the analysis screen when cells are selected. Refer to
“2.4.4 Analysis screen” for details of edit marks.
Touch the “Cell Select” button (1) on the analysis screen (Fig. 1) to open the
Cell Select screen (Fig. 2). Selected cells are displayed in colors, and cells
not selected are displayed without color or in gray.
Touch a cell on the image of the endothelium to select it.
(Fig. 1)
(Fig. 2)
(1) All selection button
Selects all cells automatically extracted.
(2) All cancel button
Cancels selection of all cells automatically extracted.
(3) Undo/Redo button
Returns or proceeds to the condition immediately before or after
respectively.
(4) “Calc. (calculation)” button
Performs calculation for analysis using the edited trace line and returns
to the analysis screen. Returns to the dark area analysis screen when
the "Dark Area” button is activated.
(1)
(1)
(4)
(2)
(3)

Tomey ViewLight EM-4000 Specifications

General

Brand	Tomey
Model	ViewLight EM-4000
Category	Microscope
Language	English