1 NOMENCLATURE AND FUNCTIONS
1-8
1
↓
2002-07-07 14:30:40
2002-07-07 14:30:40
2
↓
Electric circular graphic display
Date & Time
Back Light of Display
Contrast adjustment
Reticle
illumination
View free memory for the Card/Internal Memory
Displaying Signal Level
Set the Temperature, Pressure, Atmospheric Correction
Value (PPM), and Prism Constant Value (PSM)
Auto- inversion
Screen 1
Screen 2
Laser Plummet
(Only for Laser Plummet type)
Screen 3
3
↓
2001-07-10 14:30:40
● Only for Laser Plummet type
NP/P
Point guide
Non-prism/ Prism mod
e
GPT-8000A Series
• Screen One
1) View Date & Time
2) Electric circular graphic display [F1]
3) The light acceptance quantity level (signal level) is displayed [F2]
4) Set the Temperature, Pressure, Atmospheric Correction Value (PPM), and Prism
Constant Value (PSM)[F3]
5) Auto- inversion [F4]
6) Non-prism mode / Prism mode selection [F5]
• Screen Two
7) Adjustment the contrast of the display [F1 & F2]
8) Turn the back light of the display ON/OFF [F3]
9) Reticle illumination---Off / Low / Medium / High [F4]
10) View free memory for internal and card memory [F5]
• Screen Three
11)Turn the Point Guide option ON/OFF.[F1]
12) Turn the Laser plummet option ON/OFF [F1] (only for Laser plummet model)
To Next Page
Loading...
Need help?
General
