Topcon HiPer SR - Power Button Functions; Loading New Firmware

Display Panel Operations
PowerButton
18
P/N:1000737‐01
Power Button
Thepowerbuttonperformsmultiplefunctions.Thenumberofsecondsinwhichthebuttonispressedandheld determineshow
thereceiverwillperform.
Table2describeshowtousethepowerbutton.
Table2.PowerButtonFunctions
FUNCTION PRESS BUTTON LED DESCRIPTION
PowerOn 1+seconds PowerLEDblinksgreenuntilthestartupiscomplete,andthentheLED
turnsoff.
PowerOff 3‐10seconds AllLEDsareoff.ReleasethePowerbuttonwhentheBatteryLEDissolid
red.
FactoryReset
ClearNVRAM
10‐15seconds AllLEDsareoff.ReleasethePowerbuttonwhentheStatusLEDissolid
red.
EraseAllFiles 15‐20seconds AllLEDsareoff.ReleasethePowerbuttonwhentheRecordingLEDis
solidred.
Note:Thisactionisirreversible.Ifyouareunsureaboutthisaction,
continuetoholddownthebuttonuntilallLEDsreturntonormal.
Disregard Morethan20seconds AllLEDsreturntonormal,andthereceiverhasnottakenanyaction.
Open/Closedatafile 3timesinarowwithin
2seconds
RefertotheRecordingLEDdescription.