Topcon HiPer SR - Collecting Data; Setting Recording Parameters; Logging Rates; Recording Data

CollectingData
54
P/N:1000737‐01
• • • • • •
Collecting Data
Thischapterprovidesgeneralinformationaboutrecordingdata,downloadingit,andremovingfilestofreeupinternalmemory.
Setting Recording Parameters
TheTopconReceiverUtility(TRU)softwareenablesyoutosetloggingparameters,suchasloggingrateandtypesofmessages,in
whichtorecorddata.ThissoftwareandtheTRUReferenceManualissuppliedontheHiPerSRCD.SeetheTRUReferenceManual
formoreinformation.TheHiPerSRis
compatiblewithanyTopconfieldsoftwareforconfigurationandrecordingrawdata.
Logging Rates
Thereceiverprovidesupto2GBoffilespaceontheinternal(non‐removable)memorycard.Theamountofmemoryusedtolog
datadependsontheloggingrate.Formoreinformationaboutsettingloggingrateparameters,seetheTRUReferenceManual.
Recording Data
YoucanlograwGNSSdatatothereceiver’sinternalmemory andusetheTopco nReceiverUtility(TRU)orMAGNETOffice™
softwaretodownloadthefilestoacomputer.
Tostartorstoprecordingdatatothereceiver,youcanusetheLEDdisplaypanelorTRU.
1. PressthePowerbuttontoturnonthe receiver.