Topcon HiPer SR - Cleaning and Storing the Receiver; Getting Customer Support

Troubleshooting
CleaningandStoringtheReceiver
66
P/N:1000737‐01
–Checkthatthecableconnectorisattachedtothecorrectserialport.
–Unplugthecable,thensecurelyandproperlyreconnectittothe receiver.
• Ifusingacable,thecableisdamaged.
–Useanundamagedcable.
–Contactadealertopurchaseanewcable.
• IfusingBluetoothwirelesstechnology,theincorrectportisselected.
–UseacomputerorreceiverthathasBluetoothwirelesstechnologyenabled/installed.
–Makesurethecomputerandreceiverusethecorrectportsforcommunication.FortheHiPerSRreceiver,thisis
BluetoothserialportA(btsp\a).
Cleaning and Storing the Receiver
• Useacleanclothmoistenedwithneutraldetergentorwater.
• Neveruseanabrasivecleaner,ether,thinnerbenzene,orothersolvents.
• Alwaysmakesurethereceiveriscompletelydrybeforestoringit.Dryanymoisturewithasoft,cleancloth.
Getting Customer Support
Ifthetroubleshootinghintsandtipsinthisoperator’smanualfailtoremedytheproblem,contactTopconCustomerSupport.
Forcontactinformation,see
“GettingTe chnicalSupport”onpage7.