Topcon HiPer SR - Receiver Problems

Configuring the Receiver
UsingtheResetButton
45
P/N:1000737‐01
3. ClicktheToolsicon inthemainwindow.
TheToolswindowappears,enablingyoutoresetthereceiverandcleartheNVRAM.
Figure14:ToolsDialogBox
4. ClickResetReceiver ,andthenclickYestocontinue.
Using the Reset Button
TheResetbuttoncausesahardresetofthereceiverandshouldonlybe usedif:
• YouhavealreadyusedTRUtoresetthereceiverandthereisnoperformancechange.See“ResettingtheReceiver
(ClearingtheNVRAM)”onpage44.