Topcon HiPer SR - Page 60

Configuring the Receiver
UsingtheResetButton
46
P/N:1000737‐01
• Thereceiverdoesnotrespondtocommands.
• Thereceiverdoesnotchargetheinternalbatteries.
Resettingthereceivererasesdatanotsavedtothereceiver’ smemory.
Toresetthereceiver,pushtheresetbuttonwiththeendofapaperclipuntilthereceivershutsoff.Wait???secondsbefore
usingthepowerbuttontoturnthereceiveronagain??
Figure5:ReceiverResetButton
NeedPic