Topcon HiPer SR - Community of Europe Compliance

Troubleshooting
BluetoothProblems
64
P/N:1000737‐01
–Disconnectthereceiverfromtheothercontrollerorcomputer.
• ThereceiverportusedforconnectionisnotinCom mand mode.
a. Connectthereceivertoacomputerandopen TRU(see“Connection”intheTopconReceiverUtility(TRU)
ReferenceManual).
b. ClickConfigurationReceiverPorts.
c. ChangetheInputModefortheBluetoothserialportusedforconnectiontocmd.
TRUerrormessage:OpenCOM#portfailed:Accessisdenied
• Anotherapplicationusesthecomputerportdedicatedforconnection.
–Closetheapplication,andthenre‐connect.
–Connectthereceiverviaanother,unusedcomputerport.

LongLINKconnectionswillnotinterferewithBluetoothconnectionstocomputersorcontrollers.
Thisisthemostcommoncauseforthiserrormessage.UseTRUtodoublecheckthesettingsforthe
connectionport.