ii
HOW TO READ THIS MANUAL
Notes regarding manual style
• Except where stated, “OS” means OS-101/102/103/105/107 in this manual.
• The OS Series is available in "standard", and "Low Temperature" models. Users with a "Low
Temperature Model" should read the additional precautions specific to use under low temperatures.
● Low Temperature Model
Low Temperature Models display the seal shown at right.
• Do not remove the Low Temperature Model seal from the
instrument. This seal is used for model recognition by our
engineers during maintenance.
• Screens and illustrations appearing in this manual are of OS-103 (with Bluetooth module and
display on face 1 only). Face 2 display is available as standard or as a factory option depending on
the country of purchase.
• Location of softkeys in screens used in procedures is based on the factory setting. It is possible to
change the allocation of softkeys.
Softkey allocation: "20.6 Allocating Key Functions"
• Learn basic operations in "4. PRODUCT OUTLINE" and "5. BASIC OPERATION" before you read
each measurement procedure. For selecting options and inputting figures, see "5.1 Basic Key
Operation".
• Measurement procedures are based on continuous measurement. Some information about
procedures when other measurement options are selected can be found in “Note” (
).
• KODAK is a registered trademark of Eastman Kodak Company.
• Bluetooth
®
is a registered trademark of Bluetooth SIG, Inc.
• Windows and Windows CE are registered trademarks of Microsoft Corporation.
• All other company and product names featured in this manual are trademarks or registered
trademarks of each respective organization.
This is the mark of the Japan Surveying
Instruments Manufacturers Association.
To Next Page
Loading...
Need help?
General
